Variable chamber balers
Comprima V 150, V 150 XC, V 180, V 180 XC, V 210*, V 210 XC*
- Comprima V 150: 1.00 - 1.50 m (3'3" - 4'11") diameter bales
- Comprima V 180: 1.00 - 1.80 m (3'3" - 5'11") diameter bales
- Comprima V 210*: Bale diameters 1.00 - 2.05 m (3'3" - 6'9")
- Compression increases progressively as bale grows in diameter
- Two separate NovoGrip belt/slat elevators
The Comprima V 150, V 180, V 210* variable round balers will be: round balers will be the machinery of choice, if you are looking for high throughputs and high densities. These round balers not only deliver high density bales, high quality of work and high level of standard specification but also boast a host of innovative features, such as the double-swing guidance for the two elevators. The system comprises a double swing, the uncontrolled EasyFlow pick-up and the optional X-Cut cutter with hydraulic knife floor.
High versatility and utilization are key parameters in cost-effective round baler operation. The new variable Comprima V 150, V 180, V 210* round balers were designed in response to contractor demands and are capable of producing bales of up to 1.5 - 1.8 m (4'11" - 5'11") and 2.05 m (6'9") diameters. Smaller bale sizes are often preferred in grass silage whilst larger bales are typical in hay and straw. The bale diameter is set infinitely variable and a softer core is possible so moisture can evaporate from hay bales for example. The chamber rolls the bale in a counterclockwise sense, which ensures high throughputs and a continuous crop flow from the bale start.
Variable baling: As more material enters the bale chamber, the two NovoGrip elevators press layer by layer to form tight and wellshaped bales. The slats mesh with the crop for a positive bale feed at any stage of the cycle. The pressure is supplied by a hydraulic ram via the front double swing and the rear tensioning rods. As soon as the bale reaches its preset diameter, net wrapping is triggered. As a last step, the tailgate opens and the bale is ejected.
